DESIGN+BUILD PROJECTS BY CLEMSON COMMUNITY BUILD
Shop drawings (also known as fabrication drawings): are detailed plans that translate design intent. They provide fabricators with the information necessary to manufacture, fabricate, assemble and install all the components of a structure. In this project, we are the fabricators, manufacturers, and installers for every component our design. As we move towards the end of [...]
After the big push to send our structural engineer, John Moore, our first round of construction drawings, we spent yesterday and will continue today redlining and coordinating with John on structural details. We have identified that not only do we have a big CD Set due by the end of the week, we also are [...]
Over the past week and multiple changes later we finally have our construction documents finished. While that was going on, a crew of us went to the site to clean up some overgrown vegetation. This did not only make it look 10 times better but now we have a clear path for our walkway to [...]
Studio today represented a pivotal point in the design process for the West Crossing at Mulberry Pond! Over the weekend we were each assigned a detail to begin working through and showed up to class today ready to begin piecing them together. This step in particular has been an important lesson in communication, collaboration, and [...]
Paper and organic pumpkins, 2017 Craft Credit: (L) Lynn Wg and (R) Tyler McKenzie Hope y'all had a great Halloween and got to go Trick-or-Treating! The weather has been colder the last few days, time to pull out the sweaters and jackets for the final arrival of fall in Charleston! . The last two weeks [...]
Over the weekend, Ailed, Yage and I had mock-up one of the five benches on the north side of our pavilion. We did the bottom portion of the bench and the bench composed by the two 2x6 supports, fourteen 2x4 seating slats with 1/2" spacing. The mock-up was very helpful, we had people sitting on [...]
This weekend was a long one. We're nearly done with our CDs and about ready to start the mockup. On Saturday, Katie, Perry, and I went to the site to take out a portion of the community garden fence and mark out the extents of our concrete slab. Armed with 3 tape measures and a [...]
After classes yesterday, we met up at the shop to work on the project. Yesterday we put in the two ridge beam posts and started putting in the ties that connect the two ridge beam posts to the rest of the framing at the top of the structure. It involved a lot of checking and [...]
Over the weekend we were shown how to use a plasma cutter in order to remove the pieces we don’t need on the trailer and start building on top of it. It rained on us Sunday so we couldn’t dive into it as we planned, but today we will be getting to work on the [...]
We're back from Spring Break with a lot to do before we start building. Last Friday, we realized that we still had a lot of loose ends with our design and our drawings. We decided to stay after studio to finalize our design and understand what we had to do over Spring Break. We developed [...]